Schlage Encode Not Connecting To Bluetooth Solved!

Schlage Encode has become a popular choice for homeowners seeking to upgrade their home security. But what happens when you run into pesky Bluetooth connectivity problems?

Discover the reasons why your Schlage Encode lock might not connect to Bluetooth and find practical solutions to get it up and running again.

Unraveling the Mystery: Why Schlage Encode Isn’t Connecting to Bluetooth

If you’re scratching your head trying to figure out why, you’re not alone. Let’s dive into the possible reasons and solutions for this perplexing problem.

Out of Range

Physical obstacles

You might be surprised how many issues can be traced back to physical barriers. Walls, doors, and large objects can interfere with the Bluetooth signal, making it difficult for your Schlage Encode to connect.

If you suspect a physical obstacle is the culprit, try to find a clear line of sight between your lock and the device you’re trying to connect it to.

Distance limitations

Bluetooth connectivity has its limits when it comes to range. Typically, the maximum distance for a Bluetooth connection is around 33 feet (10 meters).

If your Schlage Encode is too far from the connecting device, the signal may not be strong enough to establish a connection.

Check the distance between your lock and the device you’re trying to connect to and make sure they’re within range.


Electronic devices

Interference can also be a major roadblock to a stable Bluetooth connection. Other electronic devices, such as microwave ovens, cordless phones, and even your Wi-Fi router, can cause signal disruption. If you suspect that another device is causing interference, try turning it off temporarily to see if the connection improves.

Wi-Fi congestion

Wi-Fi congestion can also lead to interference with your Bluetooth connection. With so many devices connected to Wi-Fi networks these days, it’s not uncommon for the airwaves to become congested. You can try changing the Wi-Fi channel on your router to see if it improves the Bluetooth connection between your Schlage Encode and your device.

Firmware or Software Glitches

Outdated firmware

Is your Schlage Encode running on outdated firmware? Old firmware can lead to compatibility issues and prevent your lock from connecting to Bluetooth. Check if there are any firmware updates available for your smart lock and install them if necessary.

App bugs

Bugs in the Schlage Encode app can also hinder the Bluetooth connection between your lock and your device. If you suspect that the issue lies within the app, try updating it to the latest version or reinstalling it to see if that resolves the connection problem.

Solutions to Get Your Schlage Encode Talking to Bluetooth Again

Now that we’ve identified some potential culprits, let’s explore the solutions that can help you get your Schlage Encode smart lock connected to Bluetooth again.

Get Closer and Clear the Way

Remove obstructions

If physical obstacles are causing connection issues, try removing them or rearranging your space to create a clear line of sight between your Schlage Encode and the connecting device. This can significantly improve the Bluetooth signal strength and help establish a stable connection.

Adjust distance

As mentioned earlier, Bluetooth connections have a limited range. If your Schlage Encode and the connecting device are too far apart, try moving them closer together. Reducing the distance between the two devices can make a huge difference in the stability of your Bluetooth connection.

Minimize Interference

Turn off other devices

If you suspect that other electronic devices are causing interference, try turning them off temporarily. This can help you determine if the interference is coming from a specific device and can provide a temporary solution while you address the root cause of the problem.

Change Wi-Fi channels

If Wi-Fi congestion is causing interference, consider changing the Wi-Fi channel on your router. This can help reduce congestion and improve the Bluetooth connection between your Schlage Encode and your device. Consult your router’s documentation or contact your internet service provider for guidance on how to change Wi-Fi channels.

Update and Reset

Update firmware and app

Keeping your Schlage Encode’s firmware and the accompanying app up-to-date is essential for maintaining a stable Bluetooth connection. Regularly check for updates and install them as needed to ensure optimal performance and compatibility.

Factory reset

If all else fails, you can try performing a factory reset on your Schlage Encode smart lock. This will restore the lock to its original settings and may resolve any lingering connection issues. Keep in mind that you’ll need to reconfigure your lock and reconnect your devices after performing a factory reset.


How do I know if my Schlage Encode lock is connected to Bluetooth?

When your lock is connected to Bluetooth, you should be able to control it using your smartphone. If the app doesn’t respond, double-check the Bluetooth status on your phone and ensure it’s enabled.

Can Schlage Encode connect to multiple devices at once?

No, Schlage Encode can only connect to one device at a time. If you want to share access with another user, you’ll need to grant them a virtual key using the app.

Why is my Schlage Encode not responding even though it’s connected to Bluetooth?

This could be due to a low battery or a software glitch. Check the battery status in the app and try updating the firmware or performing a factory reset.

How far can my Schlage Encode be from my device for Bluetooth to work?

The maximum range for Bluetooth connectivity is typically around 33 feet (10 meters). However, this range can be affected by factors like physical obstacles and interference.

Can other electronic devices interfere with my Schlage Encode’s Bluetooth connection?

Yes, devices like microwave ovens, cordless phones, and Wi-Fi routers can cause interference and disrupt your Bluetooth connection.

How do I update my Schlage Encode’s firmware?

Check the Schlage Encode app or the manufacturer’s website for any available firmware updates and follow the instructions provided to update your lock.

How can I improve my Schlage Encode’s Bluetooth signal strength?

To improve the signal strength, try removing physical obstacles between your lock and the connecting device, reducing the distance between them, turning off devices that may be causing interference, or changing your Wi-Fi channel to reduce congestion.


Schlage Encode not connecting to Bluetooth can be a real bummer, but armed with this guide, you’ll be able to troubleshoot the issue like a pro. Just remember, the key to success is understanding the root cause and applying the appropriate solution. With a bit of patience and persistence, your smart lock will be back in action, offering you the convenience and security you deserve.


Leave a Reply

Your email address will not be published. Required fields are marked *