Lost EMTEK Programming Code? Here’s how to Fix

If you have lost your EMTEK programming code, there are a few steps you can take to fix the issue

Here are some possible solutions:

Reset the lock: To reset the lock to its factory settings, press and hold the EMTEK button for three seconds, enter the code 000000, then disconnect and reconnect the battery after five seconds. If the lock blinks green twice and beeps twice, the reset is successful.

Enter a new user code: If you want to add a new user code, you can press and hold the EMTEK button for three seconds, enter your programming code, press 2, enter a new user code, and then re-enter the new user code. The lock will beep and flash green twice to indicate that the new code has been successfully added.

Contact EMTEK support: If you are unable to reset the lock or add a new user code, you can contact EMTEK support directly for assistance. Their customer service team is available Monday through Friday from 5am to 5pm PST at (800) 356-2741 or via email.

Reset the Lock

To reset an EMTEK lock, there are a few different methods depending on the specific issue you are experiencing.

Here are some possible steps to reset your EMTEK lock:

Resetting an Emtek lock code can be done by restoring the lock to its factory default settings.

To reset the lock, follow these steps:

• Remove power from the lock by disconnecting the 9V battery.
• Press and hold the EMTEK button for 3 seconds.
• While continuing to hold the EMTEK button, restore power to the lock by reconnecting the 9V battery.
• Continue to hold the EMTEK button for 3 seconds.
• The lock will flash 1 green LED and beep twice, followed by another green LED flash and 2 more beeps, indicating that the lock has been reset to its factory default settings.

Note that resetting the lock will erase all custom settings, including the programming code and user codes.

To reprogram the lock, use the default programming code provided in the user manual or contact Emtek directly for assistance.

How to Change the Preset Programming Code on Your EMTEK Lock?

To change the preset programming code on your EMTEK lock, you will need to reset the lock to its factory default settings.

Here are the steps to do so:

• Press and hold the EMTEK button for three seconds or so.
• Enter “000000”.
• After two beeps and two green LED flashes, remove power (disconnect 9V battery) from the lock.
• After five seconds, restore power (reconnect 9V battery).
• Confirm by two beeps and two green LED flashes.

Once you have reset the lock, the current programming code will be replaced with the preset programming code.

Note that the preset programming code is generated randomly in the factory, so you should change it to a new code as soon as possible.

If you need assistance programming or changing the code for an EMTEK door lock, you can contact EMTEK customer support for help.

How to Delete the Preset User Codes on Your EMTEK Lock?

To delete the preset user codes on your EMTEK lock, you can follow these steps:

1. Hold down the “EMTEK” button on the face of the lock for three seconds.
2. The screen will display “P” followed by the current date and time.
3. Press the button 3 and then enter the code you want to delete.
4. Re-enter the code to confirm it and then press delete.
5. The lock will beep, indicating that the code has been deleted.

Note that these steps may vary depending on the specific model of your EMTEK lock. If you need assistance deleting user codes or programming your EMTEK lock, you can consult the manufacturer’s documentation or contact their customer support team for help.

How to Add New User Codes on Your EMTEK Electronic Lock?

To add new user codes on your EMTEK electronic lock, you can follow these steps[1]:

1. Press and hold the EMTEK button for three seconds.
2. Enter your programming code.
3. Press 2 and then enter a new user code.
4. Re-enter the new user code.
5. The lock will beep and flash green twice, indicating that the new code has been successfully added.

Note that the specific steps may vary depending on the model of your EMTEK lock. If you need assistance programming or adding user codes to your EMTEK lock, you can consult the manufacturer’s documentation or contact their customer support team for help.