If your Braeburn thermostat is not working, there are several things you can try to fix it:
- Reset the circuit breaker
- Replace blown fuses
- Replace the batteries
- Press the reset button on the front of the thermostat
- Clean the thermostat and ensure it is properly closed
Some of the most common issues that might have caused your Braeburn thermostat to stop working include dead batteries, blown fuses, and tripped circuit breakers.
Braeburn Thermostat Not Working: Try These Troubleshooting Tips
Check and Replace the Batteries
To check and replace the batteries in your Braeburn thermostat, follow these steps:
- Locate the battery compartment, which is usually on the back of the thermostat.
- Open the battery compartment.
- Remove the old batteries.
- Install new AA batteries.
- Reinstall the thermostat onto the wall plate.
If you have a touchscreen thermostat, you will need to remove the thermostat body from the base to access the battery compartment. You can also refer to instructional videos on YouTube for visual guidance.
Check the Circuit Breaker
To check the circuit breaker for your Braeburn thermostat, follow these steps:
- Familiarize yourself with the Braeburn thermostat.
- Check if the display screen is blank, which may indicate a blown fuse.
- Unmount the thermostat from its mounting plate and remove its cover to check if it is powered on.
- Verify that AC power is available by checking the fuse, circuit breaker, and thermostat wiring.
- Reset the circuit breaker by flipping the switch to “off” then back to “on” if it has tripped.
If the circuit breaker won’t reset, there may be a short circuit, and you may need to call a technician.
Checking the circuit breaker is also advisable if your HVAC system is on the circuit with other power-consuming appliances.
Reset Your Thermostat
To reset your Braeburn thermostat, follow these steps:
- Turn the thermostat “OFF”.
- If the thermostat is battery-powered, remove the batteries.
- Press the reset button located inside a small hole on the front of the thermostat using a toothpick, paperclip, or sharp needle.
- Replace the batteries and move the switch to the HEAT or COOL position.
- Rerun your heating and cooling system.
Note that resetting your thermostat will erase all user settings and programming, so only do it if necessary.
Contact Braeburn Support
To contact Braeburn support, you can visit their website and fill out the contact form on the “Contact Braeburn Systems” page.
If you need to report a suspected adverse event or request medical information, you can use the Medical Information Request Form on the Braeburn website.
If you are a resident of Braeburn Village Apartments, you can find their contact information on their website.
For technical support, you can refer to Braeburn’s manuals or contact their technical support team.
If you need to contact Braeburn Group of International Schools, you can find their contact information on their website.
Leave a Reply