AmazonBasics Electronic Deadbolt Programming Guide

Programming the AmazonBasics Electronic Deadbolt is a straightforward process that can be done by following a few simple steps.

To enable auto-lock, enter the current programming code and press the Unlock/Lock button. Then, press key 5 and the Unlock/Lock button again. This will enable auto-lock, and the lock will automatically lock after 30 seconds of closing the door.

To change the default programming code, enter the default programming code (0000) and press the Unlock/Lock button. If you have previously changed the programming code, enter your current programming code and press the Unlock/Lock button.

Then, enter the new programming code and press the Unlock/Lock button again. The lock will beep twice to indicate that the new programming code has been activated.

The AmazonBasics Electronic Deadbolt comes with a 4-digit default programming code (0000), which should be changed to a unique number for security reasons. The lock also has a door handing identification feature that allows it to learn the orientation of the door. This feature is essential for the lock to function correctly.

Perform the Door Handing Identification Process

To perform the door handing identification process on an AmazonBasics Electronic Deadbolt, follow these steps:

• Ensure that the lock is installed correctly.
• Press and hold the Lock button while inserting the battery pack.
• Release the Lock button once the lock beeps three times.
• Press the Lock button again, and the lock will beep once.
• Rotate the lock’s turnpiece to the left (counterclockwise) and then to the right (clockwise).
• The lock will beep twice to confirm that the door handing identification process is complete.

Note that the lock may not function correctly without running the door handing identification process.

How to Change the Default/Existing Programming Code on Your AmazonBasics Electronic Deadbolt?

To change the default or existing programming code on your AmazonBasics Electronic Deadbolt, follow these steps:

1. Enter the default programming code (0000) and press the Unlock/Lock button. If you have previously changed the programming code, enter your current programming code and press the Unlock/Lock button.
2. Press the “Schlage” button on the keypad.
3. Enter a new 4-8 digit programming code and press the “Schlage” button again.
4. Re-enter the new programming code and press the “Schlage” button one more time.
5. The lock will beep twice to confirm that the new programming code has been activated.

How to Delete the Default User Code

To delete the default user code on your AmazonBasics Electronic Deadbolt, follow these steps:

• Enter the default master code (123456) and press the “#” key.
• Press the 3 buttons to enter the “Delete User Code” mode.
• Enter the default user code (1111) and press the “#” key.
• The lock will beep twice to confirm that the user code has been deleted.

Note that the lock comes with a default user code (1234) that should be removed for security reasons.

How to Add New User Codes on Your AmazonBasics Electronic Keypad Deadbolt?

To add new user codes on your AmazonBasics Electronic Keypad Deadbolt, follow these steps:

1. Enter your current programming code and press the Unlock/Lock button.
2. Press 1 and then press the Unlock/Lock button to create a new user code.
3. Enter a 4-10 digit code and press the Unlock/Lock button again.
4. Re-enter the new user code and press the Unlock/Lock button one more time.
5. The lock will beep twice to confirm that the new user code has been added.

Note that the lock allows you to store up to 10 user codes at a time. If you have already added 10 codes, you will need to delete one to add a new code.

How to Disable/Enable All User Codes on Your AmazonBasics Electronic Deadbolt?

To disable all user codes on your AmazonBasics Electronic Deadbolt, follow these steps:

1. Enter your programming code and press the Unlock/Lock button.
2. Press 8 and then press the Unlock/Lock button.
3. The lock will beep twice to confirm that all user codes have been disabled.

To enable all user codes, repeat the same steps but press 9 instead of 8 in step 2.

How to Create a One-time User Code on Your AmazonBasics Electronic Deadbolt?

To create a one-time user code on your AmazonBasics Electronic Deadbolt, follow these steps:

• Enter your programming code and press the Unlock/Lock button.
• Press 2 and then press the Unlock/Lock button.
• Enter a 4-10 digit code and press the Unlock/Lock button again.
• The lock will beep twice to confirm that the one-time user code has been created.
• The one-time user code will only work once and will be automatically deleted after it is used.

Note that the lock allows you to store up to 10 user codes at a time, and you can delete individual user codes or all user codes at once.

Enabling/Disabling Auto-Lock

To enable or disable auto-lock on your AmazonBasics Electronic Deadbolt, follow these steps:

1. Enter your programming code and press the Unlock/Lock button.
2. Press 5 and then press the Unlock/Lock button to enable auto-lock. Press 6 and then press the Unlock/Lock button to disable auto-lock.
3. The lock will beep twice to confirm that the auto-lock feature has been enabled or disabled.

How to Factory Reset Your AmazonBasics Electronic Deadbolt?

To factory reset your AmazonBasics Electronic Deadbolt, follow these steps:

1. Remove the battery cover to find the reset button (a round button labeled “R”).
2. Press and hold the reset button for 10 seconds until the lock beeps twice.
3. Release the reset button, and the lock will beep twice again to confirm that the factory reset is complete.

Note that performing a factory reset will delete all custom programming, and you will need to start over again to program the lock.